-
Description
It is time to stop losing untapped revenue by turning your wood waste into valuable material. The Cantek FL12 Fully Automatic Finger Jointer represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliability, ensuring consistent performance year after year. With its pioneering technology, this system delivers exceptional value, redefining industry standards in terms of both performance and return on investment, establishing itself as a constant catalyst for innovation in the wood industry.
Key Advantage
Designed for 2~300 mm (0.079~11.8”) wood length
The three initial F-I01 hand feeding tables automatically carry workpieces, allowing for continuous infeed by operator
The F-C31 finger shaper performs scoring, trimming, shaping, and gluing on both ends of the workpiece
The workpieces feed directly onto the F-D01 automatic feeding table, where workpieces are automatically turned over from vertical to horizontal by a brush wheel
Synchronized jointing and length cutting is performed in a 2-step process within the F-A08 Assembly Press– the standard jointing length is 14 feet -
Specs
The FL12 Fully Automatic Finger Jointer comes with:
F-I02 Hand Feeding Table
DESCRIPTION
SPECIFICATION
Automatic feeding table
650 mm (25.6“)
Feed drive motor
1 HP x3
Machine dimensions (L x W x H)
3190 x 870 x 970 mm (126 x 35 x 39“)
Packing dimensions (L x W x H)
3300 x 970 x 1070 mm (130 x 39 x 43“)
F-D01-12 Automatic Feeding Table
DESCRIPTION
SPECIFICATION
Automatic feeding table
650 mm (25.6“)
Range of material length
150~1000 mm (5.9”~39.4“)
Range of material width
30~160 mm (1.2~6.3“)
Motor
1 HP
Brush wheel drive motor
1/8 HP
Machine dimensions (L x W x H)
1440 x 2660 x 1330 mm (57 x 105 x 53“)
Packing dimensions (L x W x H)
1540 x 2760 x 1430 mm (61 x 109 x 57“)
F-C31 Automatic Finger Shaper – Right End
DESCRIPTION
SPECIFICATION
Max. available width working table
650 mm (25.6”)
Range of workpiece length
150~1000 mm (5.9~39.4”)
Range of workpiece width
30~160 mm (1.2~6.3”)
Trimming Saw Speed
2800 RPM, 3400 RPM
Finger Cutter Speed
5000 RPM
Scoring Saw Speed
2800 RPM, 3400 RPM
POWER REQUIRED
Table Drive Motor
2 HP
For Conveyor
1/2 HP x3
For Scoring Saw
2 HP x3
For Trimming Saw
5 HP x2
For Finger Cutter
20 HP x2
Dust Outlet Diameter
6” x2, 4” x4
Dia of Cutter (in/out)
ø70 / ø160 mm (ø2.8 / ø6.3)
Machine Dimensions (L x W x H)
3750 x 3070 x 1650 mm (148 x 121 x 65”)
Noise Level
88.2 Db
Packing Dimensions (L x W x H)
4850 x 2130 x 1750 mm (191 x 84 x 69”)
1: Including 10 pieces of finger cutters (160x70x4mm x 2T)
2: Includes saw blade
3: Injection type glue system
F-A08 Assembly Press
DESCRIPTION
SPECIFICATION
4.5 m
6 m
Available Length of Product
4.5 m (15 ft)
6.2 m (20 ft)
Available Thickness of Product
60 mm (2.4”)
60 mm (2.4”)
Available Width of Product
160 mm (6.3”)
160 mm (6.3”)
Finger Assembly Pressure
0~331 lbs/cm²
0~331 lbs/cm²
Feeding Speed
263 FPM
263 FPM
Capacity Length Product
4~6 PCS
5 PCS
Hydraulic Power Unit
5 HP
5 HP
POWER REQUIRED
For Feeding
2 HP x1, 3 HP x1
2 HP x1, 3 HP x1
For Sizing Saw
5 HP
5 HP
Dust Outlet Diameter
4” x1
4” x1
Machine Dimension (L x W x H)
8770 x 1380 x 1350 mm (346 x 55 x 54”)
10290 x 1380 x 1350 mm (406 x 55 x 54”)
Packing Dimension (L x W x H)
5800 x 1480 x 1460 mm (229 x 59 x 58”)
7300 x 1480 x 1460 mm (288 x 59 x 58”)
STANDARD ACCESSORIES:
1: Trimming sawblades (2 pieces)
2. Hocking Sawblades (2 pieces)
3. Scoring Sawblades (3 pieces)
4. Cutter Presetter (1 set)
5. Shaper Cutter Grinder (optional)