-
Description
The Cantek MX350 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who requires pre-milling.
-
Specs
Feeding speed|29 FPM
Panel thickness|0.315”~1.77″
Max. pre-milling thickness|1.77″
Edge thickness|0.0158”~0.118”
Min. panel width|4”
Min. panel length|6.7”
Working table height|33.5”
Dust collection outlet|Ø 5” x 3
Total connected power|10 HP
Machine dimensions (LxWxH)|147” x 52” x 54”
Machine weight|1452 lbs
Shipping dimensions (LxWxH)|91” x 29” x 54”
Shipping weight|1558 lbs
Electrical requirement|230/3/60: 40 amps WORKING UNITS: PREMILLING UNIT
High-frequency pre-milling units can remove up to 3mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels
(2) counter-rotating diamond cutterheads for optimum results and longevity
END TRIM
High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades
TOP & BOTTOM TRIM
High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
RADIUS SCRAPING
Radius scraper with 2mm radius
BUFFING
3000 RPM top & bottom buffing units to polish the machined edge MOTOR POWER: Feeding motor|1 HP
Pre-milling motors (2)|1 ½ HP x 2
Glue spindle motor|¼ HP
Front/rear trimming motor|0.3 HP
Upper trimming motor|½ HP
Lower trimming motor|½ HP
Upper buffing motor|0.16 HP
Lower buffing motor|0.16 HP
Pre-heating|½ HP
Glue pot|1 ¾ HP -
Download