-
Description
- Standard Version with: insertion mechanism attached to the infeed table (i.e. using moulder infeed table)
- Infinitely adjustable in widths from 1” – 9.5”,
- Special Feed Shoe which is pneumatically pressured against the piece of wood to be fed in is mounted on 2 HD shafts that are parallel to the moulder Infeed Table – The shoe is pressed against the material and then is pushed by Air Cylinder towards the Moulder or other Infeed
- Pressure and Infeed Speed are regulated by pneumatic cylinders and controlled by Regulators & Pressure Gauges,
- Loading magazine is approx. 20” high, easily adjustable in width according to the workpieces being run
- Electrics are 230/460 or 575/3/60 including control to allow connection to moulder infeed
Work Piece Sizes:
Length from 8” – 5 ft**
Width
from 1” – 9.5” (12” optional)
Thickness from .375” – 5”
**Note: This machine is designed to handle lumber up to 5’ in length. Lumber condition and/or Green lumber may Limit the max. length that can be handled. Stack height in the hopper may have to be reduced to accommodate for various product conditions and longer lengths.– Also shorter material can be fed but it will have to butt feed